|
Specifications
|
|
Material:
|
Laminated impact Acrylic |
|
Finish:
|
Gloss |
|
Sheet Size:
|
24" x 48¾" - Full
24" x 24" - Half
12" x 24" - Quarter |
|
Thickness 1-Ply:
|
NONE |
|
Thickness 2-Ply:
|
1/16" (1.6mm)
Use 422 as first three digits in item code
1/8" (3.2mm)
Use 442 as first three digits in item code |
|
Thickness 3-Ply:
|
1/16" (1.6mm)
use 423 as first three digits in item code
1/8" (3.2mm)
Use 443 as first three digits in item code |
|
Usage:
|
Interior signage
Exterior signage
Personal identification |
|
Engraving Method:
|
Rotating Carbide
|
|
Cutting Depth:
|
.012" (.3mm) |
|
Capabilities
|
|
Scores
|
|
|
Bonds
|
|
Saws
|
|
|
Permits Fine Engraving
|
|
Drills
|
|
|
UV Stable
|
|
Shears
|
|
|
Back-Filling
|
|
Laser Vector Cuts
|
|
|
Back-Lighting
|
|
Bevels
|
|
|
Braille-Engravable
|
|
Heat Bendable
|
|
|
Embosses
|
|
Screen Prints
|
|
|
Ink Prints
|
|
Hot Stamps
|
|
|
Thermal Prints
|
|
|
Physical Properties
|
Typical Values |
ASTM Method |
| IZOD Impact Strength
|
| Notched at 73°F (22.777°C) |
1.2 ft lbs/in |
D-256 |
| Notched at 32°F (0°C) |
.7 ft lbs/in |
D-256 |
| Tensile Strength |
| To break |
5,400 psi |
D-638 |
| Elongation before break |
35% |
D-638 |
| Flexural Strength |
| Loan to stretch outer surface 5% |
7,000 psi |
D-790 |
| Specific Gravity |
1.15 |
D-792 |
| Rockwell Hardness |
R99, L77 |
D-785 |
| Deflection Temperature |
| Temperature at which material deflects .010"
(.254mm) at 264 psi |
170°F (76.66°C) |
D-648 |
| Coefficient of Thermal Expansion |
| Inch/inch/°F |
3.8 x 10-5 |
D-696 |
|
| LACQUERS engraving material softens at about 200°F
(93.33°C) sufficiently so that it can be bent as needed. It can be
sawed, drilled and bonded, but not sheared. For best appearance, sawed
edges should be buffed on material 1/8" (3.0mm) and thicker.
|
| The base and cap materials were tested for flammability by
Underwriters Laboratories. The base and cap materials are rated 94 HB
on the UL 94 test. The foil was judged as not contributing to the
combustion of the base material. |
| Prolonged tests in the laboratory to evaluate fading resulted in
no noticeable change in colors after 500 hours of exposure in the
Fade-O-Meter tester.
MSDS
information |
|
