|
Specifications
|
|
Material:
|
Microsurfaced ABS |
|
Finish:
|
Brushed metal
Shiny metal |
|
Sheet Size:
|
24" x 49" - Full
24" x 24" - Half
12" x 24" - Quarter |
|
Thickness 1-Ply:
|
NONE |
|
Thickness 2-Ply:
|
1/32" (.8mm)
Use 512 as first three digits in item code
1/16" (1.6mm)
Use 522 as first three digits in item code
3/32" (2.4mm)
Use 532 as first three digits in item code
1/8" (3.2mm)
Use 542 as first three digits in item code |
|
Thickness 3-Ply:
|
NONE |
|
Usage:
|
Interior signage
Personal Identification |
|
Engraving Method:
|
Rotating Carbide
|
|
Cutting Depth:
|
.003" (.08mm) |
|
Capabilities
|
|
Scores
|
|
|
Bonds
|
|
Saws
|
|
|
Permits Fine Engraving
|
|
Drills
|
|
|
UV Stable
|
|
Shears
|
|
|
Back-Filling
|
|
Laser Vector Cuts
|
|
|
Back-Lighting
|
|
Bevels
|
|
|
Braille-Engravable
|
|
Heat Bendable
|
|
|
Embosses
|
|
Screen Prints
|
|
|
Ink Prints
|
|
Hot Stamps
|
|
|
Thermal Prints
|
|
|
Physical Properties
|
Typical Values |
ASTM Method |
| IZOD Impact Strength
|
| Notched at 73°F (22.777°C) |
2.5 ft lbs/in |
D-256 |
| Notched at 32°F (0°C) |
1.6 ft lbs/in |
D-256 |
| Tensile Strength |
| To break |
4,200 psi |
D-638 |
| Elongation before break |
50% |
D-638 |
| Flexural Strength |
| Loan to stretch outer surface 5% |
8,000 psi |
D-790 |
| Specific Gravity |
1.05 |
D-792 |
| Rockwell Hardness |
R108, M80 |
D-785 |
| Deflection Temperature |
| Temperature at which material deflects .010"
(.254mm) at 264 psi |
205oF (96.11oC) |
D-648 |
|
| The physical properties of the NOMARK PLUS engraving
material are largely controlled by the base material. This material
was chosen to provide a good balance of properties for this product to
satisfy a wide range of uses. The physical properties of the STANDARD METALS engraving
material are largely controlled by the base material. This material
was chosen to provide a good balance of properties for this product to
satisfy a wide range of uses. |
| The material softens at about 200°F (93.00°C) sufficiently so that
it can be bent where needed. It can be drilled, sawed, sheared,
nailed, bonded and die-cut. |
| The base material, as well as the foils, were tested for
flammability by Underwriters Laboratories. The base material is rated
as 94 HB on the UL 94 test. The foil was judged as not contributing to
combustion of the base. |
| Most of the colors will exhibit slight fading under prolonged
exposure to direct sunlight. There are, however, those which tend to
fade more severely. This material is designed for use where no direct
extreme exposure is encountered.
MSDS
information |
|
