Rowmark ColorHues - Laser & Rotary engraving material

ColorHues™ (cell cast acrylic - PMAA) is a single-ply decorative sheet material with brilliant shades of color, offered in translucent and opaque hues, and is suited as a signage component or substrate.

Providing the benefits of glass in a lightweight, scratch resistant material.

Rowmark Technical Help

ColorHues Jump Chain Set Available
Only $5.00!

Specifications
Material:	Cell cast acrylic (PMMA)
Finish:	Matte non-glare (1 side) Gloss (1 side) *Clear, Ice Blue and Glass Green are gloss on both sides.
Sheet Size:	24 1/8" x 49" -0, +.125" (613 x 1245mm)
Thickness 1-Ply:	1/8" (3 mm) -0,+/-.012" (0.3mm) Use 341 as first three digits in item code. 1/4" (6 mm) -0,+/-.024" (0.6mm) Use 351 as first three digits in item code.
Thickness 2-Ply:	NONE
Thickness 3-Ply:	NONE
Usage:	Exterior signage Interior signage Tactile Signage Signage Component or substrate
Engraving Method:	Laser Rotating carbide
Cutting Depth:
Capabilities
Scores		Bonds
Saws		Permits Fine Engraving
Drills		UV Stable
Shears		Back-Filling
Laser Vector Cuts		Back-Lighting
Bevels		Braille-Engravable
Heat Bendable		Embosses
Screen Prints		Ink Prints
Hot Stamps		Thermal Prints

ColorHues also withstands Sandblasts.

Physical Properties	Typical Values
Rupture by Pull
	760 kg/cm²
Flexural Strength (rupture by bend)
Loan to stretch outer surface 5%	1050kg/cm²
Specific Gravity	1.19-1.20
Rockwell Hardness	M-100
Deflection/Distortion Temperature
Temperature at which material deflects .010" (.254mm) at 264 psi	100° C
Coefficient of Linear Expansion
Inch/inch/°F	6x10^5/cm/°C
Temperature Ranges
Highest temperature of continuous operation	80° C
Temperature ranges of thermoforming	140-180° C

Note: Natural variation in color is to be expected with this product

*Cast acrylics have thickness variations that may present difficulties in applications where thickness tolerance is important (i.e. fitting into extrusions, thermoforming applications where walls must maintain uniform thickness and assembly of complex structures). Remember to check gauge when non-contact engraving takes place and to periodically re-check focal lengths when laser engraving. In some cases, thickness variations may require the operator to make multiple passes during laser engraving.
NOTE: The above information is given in good faith, but no warranty, express or implied, is given.

MSDS information

ColorHues pricing	1-ply
Item #	CH341-xxx	CH352-100 Clear Translucent
Thickness	1/8”	1/4"
Full sheet (24” x 48.75”)
1-4 sheets	54.40	102.80
5-9 sheets	48.96	92.52
10-14 sheets	46.24	87.38
15-29 sheets	43.52	82.24
30+ sheets	40.80	77.10
Half sheet (24” x 24”)
1-9 sheets	27.20	51.40
10-19 sheets	24.48	46.26
20-29 sheets	23.12	43.69
30-59 sheets	21.76	41.12
60+ sheets	20.40	38.55
Quarter sheet (12” x 24”)
1-19 sheets	13.60	25.70
20-39 sheets	12.24	23.13
40-59 sheets	11.56	21.85
60-119 sheets	10.88	20.56
120+ sheets	10.20	19.28