Rowmark PaintPlus - Acrylic paint filling for reverse engraving

Answering the needs of today's sign-maker, Rowmark now offers two distinct custom blended acrylic paint kits in the PaintPlus™ Primary and Safety paint lines. PaintPlus paints are acrylic non-toxic paints that are ideal for sign-making applications enhanced with custom color matching, multi-color and 3D effects. PaintPlus paints are specially formulated for color filling Rowmark's sub-surface (reverse engravable) products. The Primary line offers a wide range of colors that were selected to match twelve of the most popular colors found in Rowmark’s ADA Alternative and Ultra-Mattes product lines. The Safety line of paints is formulated for applications where recognized safety or OSHA colors in signage are needed.

The smooth, rich colors provide excellent coverage and are self-sealing. PaintPlus paints are available in kits of twelve 2 fluid ounce (59,15 ml) or 8 fluid ounce (236,6 ml) jars, and may also be purchased individually. Kits include foam brush applicators and instructions for use.

2oz: $6.00/bottle
8oz: $14.00/bottle

PaintPlus Primary 2 FL OZ (59,15 mL) kit:

Item Code: RPKIT-2

Kit contains: twelve, 2 FL OZ jars of

PaintPlus Primary paint colors and two

1” foam applicators.

PaintPlus Primary 8 FL OZ (236,6 mL) kit:

Item Code: RPKIT-8

Kit contains: twelve, 8 FL OZ jars of

PaintPlus Primary Paint colors, two

1” and two, 3” inch foam applicators.

2oz kit: $53.00
8oz kit: $116.00

Download PaintPlus Primary paint instructional booklet

2oz: $6.00/bottle
8oz: $14.00/bottle

PaintPlus Safety 2 FL OZ (59,15 mL) kit:

Item Code: RSKIT-2

Kit contains: six 2 FL OZ jars of

PaintPlus Safety paint colors and a

1” foam applicator.

PaintPlus Safety 8 FL OZ (236,6 mL) kit:

Item Code: RSKIT-8

Kit contains: six 8 FL OZ jars of

PaintPlus Safety Paint colors, a

1” and 3” foam applicator.

2oz kit: $53.00
8oz kit: $116.00

Download PaintPlus Safety paint instructional booklet

Please carefully read these instructions and warnings before using PaintPlus paints

Where to Use
Properly prepared acrylic surface.

Drying Time
Dry to the touch in 30-45 minutes. Paint only when air temperatures are 50-90°F (10-32°C).

Surface Preparation
Thoroughly clean the surface and allow to dry.

Application/Clean-Up
Stir/Shake paint throughly to ensure uniform color. Finish with long, even strokes in one direction. Clean brush and hands with warm, soapy water.

Usage
Color filling requires a little bit of technique and preparation for optimal results. We recommend the following steps to prep the piece before painting or color filling. First, mask the edges of the plate to avoid over-painting. Use a soft cloth, paper towel, or other non-abrasive material underneath your plate.

For Best Results
Generally two coats of PaintPlus paints are required to get the best coverage and block any small holes that form in the paint from air pockets. Make one application from top to bottom and the second coat from bottom to top to get coverage on all of the character edges.

Rowmark does recommend that you completely cover the back of the finished sign or badge with paint to avoid any shadows when viewed from the front. This is not neccessary if the substrate will be mounted on another surface or a backer plate is used.

For exterior applications, Rowmark recommends adhering a backer plate to the painted surface to minimize exposure to moisture.

Storage & Disposal
Do not freeze. Keep container closed when not in use. In case of spillage, absorb with inert materiel such as sand or kitty litter. Dispose of contaminated absorbent, container and/or unused contents in accordance with local, state and federal regulations.